Before You Install Tuff Rib Metal, You Must See This To Avoid A Total Nightmare
This manual is to serve as a guideline to properly installing the tuf rib panel. Check with local building codes prior to installing metal roofing. Any questions you may have regarding proper installation of the tuf rib panel should be directed to a representative. With roof and wall applications, start installing at the end of the building opposite the direction of the prevailing wind. With horizontal wall applications, start installing the metal at ground level and work up.
On roofs, the purlin spacing ought to be no more than 24 o/c. The minimum slope to. Tuff rib and/or diamond rib (wall steel) metal installation manual 36 panels note: The details and written instructions described in this manual are suggested installation methods to ensure a quality application of our products and should be considered as a guideline only. Extremely versatile, they are suitable for homes and businesses as well as agricultural and utility buildings. Some safety precautions always wear heavy gloves when working with steel panels to avoid cuts from sharp edges. When cutting or drilling steel panels, always wear safety glasses and sweep off any metal shavings immediately to prevent eye injury from flying metal fragments. If you must walk on a metal roof, take great care. Before installing tuff rib panels, it's essential to prepare your roof deck properly to ensure that the metal panels will be installed correctly. To ensure that you are following proper installation guidelines, remove all old roofing materials and inspect the roof deck for any damages or protruding fasteners that would hinder the proper.
Tuff Clad PVC Metal Flashing for Vinyl Decking by Tufdek
