I Swapped Standing Seam For Tuff Rib And Honestly My Jaw Dropped!

Its far easier to install than standing seam, and you dont need to rent a seamer to install it. If you have installation questions, check out our exposed fastener plywood installation guide to learn how to install tuf rib metal roofing. Our architect suggested we ask for our standing seam roof without stiffening ribs, and we passed that info on to our builder. Tonight i arrive at the jobsite only to discover they have formed and cut all the panels with the stiffening ribs (aka striations) in between the standing seams. Choosing the right metal roofing style can significantly impact the ease and efficiency of the installation process.

Standing seam suits modern minimalism and refined traditional styles. Specify seam height and rib spacing to align with faade rhythms, eave depths, and fenestration. And then the bottom would have cuts. But that rib style doesnt look like a panel that gets turned up. Yeah, take those seam screws out, fill the bottom hole after cleaning the metal then put the screw on the other side of the panel where it belongs. You could lay some butyl tape under the rib if you remove the stitch screws. I know some have done extensive research on the different metal roofs offered. (yes, brettski, this means you, amongst others. )a friend is putting up a pretty large pole barn, that will have living quarters upstairs in half of the area. The company is telling him that the screw thru roofs.